What Plumbers Wish You Knew

It’s likely that at some point, you’ll have to call our plumbers in: whether it’s for a leaky faucet, pipe replacement or a new bathroom in your basement. However, you can reduce likelihood of major damage. Here are some ways to reduce the number of visits from plumbers and the severity of your repairs:

Never hang anything from your pipes

The weight can break them and cause a flood. Even if you think it’s something small and light, there’s no guarantee that the pipe can withstand it. You also introduce the risk of the item snagging on a passerby and rupturing the pipe. 

Use a strainer to keep hair and other items from clogging pipes

It might seem easy to let hair and food disappear down the drain but at some point, the accumulated effect will cause it to back up your drainage system. Check drains regularly and remove any items that may have slipped past your strainers.

Be careful what you flush down the toilet

Even items labelled “flushable” like flushable baby wipes can cause a problem. Your best option is to stick to waste and toilet paper. Everything else should be discarded in the garbage. 

Avoid abrasive cleaners that can corrode your pipes

If you’re not sure what material your drain and sewage pipes are made from, have a professional take a look. Harsh cleaners can destroy piping, sometimes so slowly you don’t even know it’s happening until it’s too late. 

Turn off and drain your outdoor faucets before winter arrives

Avoid burst pipes by draining outdoor pipes that can freeze when the temperature falls. These taps have a drain valve that you open to empty the water inside the pipe. Ensure you do it before the cold weather sets in and not after the first freezing night. 

Don’t wait until a leak is severe before calling a plumber

It’s easy to procrastinate when you see the first few drips, but a small leak is much easier (and cheaper) to fix than a flooded house. Not to mention the money you’ll save on your water bill. 

Know the location of your main shutoff valve

Knowing this is not only beneficial for the plumber when he arrives, but can reduce damage if you turn off the main supply as soon as a major leak happens. Take the time to show everyone where it is to reduce the potential for a huge, costly disaster. 

If you want to read any more about what you can do about your plumbing problems, click HERE

Logo with slogan

If you need help to keep your plumbing in working order, we can work with you to prevent any issues from happening. Give us a call at (877) 552-2326 or Schedule A Service with one of our plumbers!

Roots Could be the Root of Sewage Problems

Large Tree with large roots

According to the US Department of Agriculture, tree roots cause more than 50% of all sewer blockages, costing money for both the root removal and pipe repair. Continue reading to learn more about this issue, what to do about it, and how to prevent it.

Continue Reading…

Heating Bill Too High This Winter?

Thermostat in Snow
Don’t Break the bank to avoid freezing this winter!

Dealing with cold, yucky weather for months on end is hard enough. But paying more for heat just makes it worse. Here are some tips for saving cash on your heating. As a result, you can go therapy shopping to get you through the winter misery. 

Continue Reading…

What Causes Pipes to Burst in the Summer and How to Prevent Them

Burst pipes are typically a concern in the winter, due to freezing temperatures. Unfortunately, your pipes are not safe just because it is summer. Here are some reasons your pipes can burst during the warmer months and what you can do to stop it from happening!Burst

Older Pipes
Pipes will degrade and deteriorate over time, like most things. Metal pipes are especially susceptible to corrosion, while plastic pipes break down naturally over time. When the pipes in your home age, they slowly lose their ability to handle the pressures they are constantly subjected to. As your pipes deteriorate, they become more and more likely to burst. Your best defense against aging pipes is to replace them before they fail you. 

Pipe Erosion and Corrosion
When your pipes erode or corrode, they create weak spots in your piping. These weak spots are vulnerable and more likely to leak and burst because they can no longer withstand the water pressure. Stay ahead of erosion and corrosion by having your pipes inspected annually.

Also, keep in mind that hot water has the potential of causing the soil around your outdoor pipes to move, which can damage and even break the pipes. This is especially true when the weather is dryer. While this typically is a larger concern for water mains found in the street, the pipes leading up to your home is also vulnerable. If you are concerned about your outdoor pipes, you can have one of our expert plumbers come to your home and assess your risks.

Clogged Pipes
A burst pipe is just one of the concerns caused by a clogged pipe. If your water happens to have a high mineral content, you may have extra reasons to be concerned. Over time, mineral deposits will build up in your pipes. This build up reduces the area in your pipes, restricting water flow and increasing pressure. In cases when the pressure exceeds the pipe’s threshold, it can cause the pipe to burst. If you happen to live in an area where the water has a higher mineral count, also known as hard water, having a water softener installed by one of our expert plumbers is an effective method to protect your pipes. Water softeners are designed to remove most of the minerals in your water and help prevent your pipes from clogging.

Poorly Installed Pipes
Unfortunately, not every plumber has as high standards as we do and poorly installed pipes are at a greater risk of failure, leaks and bursting. Whether they are improperly soldered, poorly insulated or inadequately supported, if your pipes were not installed correctly, you could be in for some unpleasant surprises. If you have any concerns about how your pipes were installed, call us at 
(866) 844-3770, to have your plumbing system inspected by a true plumbing professional. 

If you have any plumbing, heating, cooling or electrical needs, simply call us at:

(866) 844-3770

or feel free to check us out online at

Be sure to check us out on FacebookTwitterPinterest,
LinkedInGooglePlus and Instagram

6 Reasons Why Your Hot Water is Unexpectedly Cold

Waking up early and hopping into a cold shower is not a fun way to start your day. So what is causing your hot water to run cold? One of these six reasons is likely to blame for your icy wake-up call.

water

Reasons Your Hot Water is Cold

1. Leaking hot water pipe

If a pipe is leaking in your basement, for example, it won’t reach your bathroom, especially if your shower is on the second floor. As long as the pipe isn’t hidden in a wall, you should be able to find the problem easily. However, a leak in a hidden pipe could be more of a challenge to detect. Call us right away at (866)844-3770 if you suspect that you might have a leaking pipe.

2. The pilot light is out

This is a potential issue if you have a gas-fired water heater. If you don’t know how to check your heater for the pilot light, look in your owner’s manual. Follow the instructions to relight it and if it doesn’t work, you likely have a bigger problem that needs special attention.

3. The burner isn’t working

Electric heaters have an element (sometimes two) that heats the water. If you do not have hot water and there is no leak, your element might not be working. These water heaters typically have a lifespan of about 7-10 years so if your heater is around this age, it’s possible that the element has failed and needs replacement.

4. The thermostat is set wrong or not working.

Water heaters have a thermostat set at a specific temperature. It might be set too low and not giving you hot enough water to have your shower. Follow the instructions to change the thermostat setting. If it still doesn’t work, you may need to change your thermostat.

5. The Breaker Tripped

Your water heater might have tripped the breaker. Check your panel and reset the breaker. If it happens again, that signals an electrical problem and you should give us a call right away. You may have to replace your heater, depending on the severity of the problem.

6. The tank is too small

If everything is working well but you constantly face a cold shower if you’re the last one in, your heater might be undersized. You can either race to the bathroom before everyone else, wait for the water to heat up again, or replace your heater with one that has a larger capacity.

Call in a professional

Don’t take chances with your hot water system. Give us a call to make sure everything is working well and to keep your hot water running.

If you have any plumbing, heating, cooling or electrical needs, simply call us at:

(866) 844-3770

or feel free to check us out online at

Be sure to check us out on Facebook, Twitter, Pinterest, LinkedInGooglePlus and Instagram